- Deer Fence Kits
- Poly Deer Fence
- Metal Deer Fence
- Deer Fence Accessories
The PRO-SW2000XLS Automatic Gate Operator will make your deer fencing even more convenient to access through your single leaf or dual leaf access gates. This kit will include everything necessary to install your automatic gate opener: the operator arm and power cable, mounting hardware, an easily programmable push-button transmitter, control box, AC transformer, and battery. This system features a larger, higher powered, and lower RPM motor with reduced gear motor noise and a 10% increased operating speed. It may be programmed to push or pull open, and features a soft start/stop for mechanical longevity. Inherent obstruction sensing will keep you, pets, vehicles, and your fence safe.
The PRO-SW2000XLS will operate a gate up to 16 ft. (4.9 m) long or weighing 500 lbs. (226.8 kg) per leaf if all proper installation procedures have been followed. This product is compatible with all fencing offered by DeerBusters.com. The PRO-SW2000XLS is compatible with single leaf access gates. For dual leaf access gates, you will need the PRO-SW2002XLS Automatic Gate Operator.
Operator length: with arm fully retracted is 33.75˝(85.2 cm), mounting point to mounting point
Shipping weight: 31 lb
Operating temperature: -5 F (-21C) to + 160 F (71C)
Opening time: From 15 to 20 seconds
Range of arm stroke: up to 15˝(38 cm)
Auto close adjustable 3–120 seconds delay
12VoltDC/ 7.0 amp hour, sealed, rechargeable battery (included), battery charge is maintained by a 120VAC/60Hz input and 14V AC, 28VA, transformer
Powered by a reliable 12 Volt DC motor
For a complete list of specifications, recommended accessories, and additional tools and materials that may be required for a successful installation, please read the product instructions and specifications.
FREE Ground Shipping over $99!
Orders usually ship in 1-2 business days.
Orders ship via FedEx or freight carrier.